X1 BMW Diesel - Failure of the airbag system possible cause?

Hello, I had the well-known BMW problem (fault in the restraint systems). After disconnecting and reconnecting the battery, the fault was still not resolved. So I connected Carly and deleted the error memory and queried it again, after that the error was gone and fortunately has not come back yet.

(Translated from German)

So the airbag light is on , but unsure whether it’s the seat occupancy the sensor that’s under ya bum or the little box that’s under the seat this is for the passenger seat thanks

The airbag light could be triggered by either the seat occupancy sensor or the control module under the seat. A good first step would be to check the wiring and connectors under the seat to ensure they are properly connected and not damaged. If the issue persists, a diagnostic scan tool can help identify the exact cause. However, as this is a safety-related issue, I would recommend having it checked by a professional mechanic if you're unsure.

Airbag fault in Skoda Octavia Cable break in the driver's door rectified.

(Translated from German)

Where to find the heating fuse lambda sensor bmw e82 120i 2010

(Translated from French)

Hello, You can find a fuse diagram for your vehicle in the owner's manual. You should be able to find the fuse you are looking for here.

(Translated from German)

Hello error with Carly read out error seat occupancy mat then plugged in a simulator but error remained ??

(Translated from German)

If the error remains after installing a simulator, it's possible that the simulator is not functioning correctly or the issue might be elsewhere in the system. I would recommend clearing the error codes with your diagnostic tool and see if the error returns. If it does, it would be best to have a professional mechanic inspect the system to avoid any safety risks.

Hi, I have a Bmw e60 and I get error 9AFF. how can I fix it?

(Translated from Spanish)

The error code 9AFF on a BMW E60 is related to the safety battery terminal. This could be due to a faulty battery safety terminal, a poor connection, or a wiring issue. I would recommend starting by checking the battery safety terminal and its connections. If you're not comfortable doing this, it would be best to have a professional mechanic look at it. Remember, this is a safety-related issue, so it's important to have it checked out. Do you have any further questions?