StefGross19
ABS warning light and shifting problems with BMW X3 petrol engine from 2016
(Translated from German)
39 comment(s)
Kam_Ansari
Seems that Carly can not reset the transfer case oil code after changing the oil. Is there a solution other than dealer visit?
CarlyMechanic
Quotation:
@Kam_Ansari wrote on
Seems that Carly can not reset the transfer case oil code after changing the oil. Is there a solution other than dealer visit?
Unfortunately, as of now, Carly does not support the reset of the transfer case oil code. You might want to consider using a different scan tool that has this capability. Alternatively, a visit to a professional mechanic or dealership would be the best course of action to ensure the code is properly reset. Please keep us updated on your progress and let us know if you have any further questions.
DerWikinger
I have a serious problem! My distributor gearbox has been overhauled. But I have 2 permanent errors from the gearbox and 2 from the drive stabilization. The gearbox cannot be reset. BMW 750 dx, F1, Thank you very much, Mfg Erik Hofmann
(Translated from German)
CarlyMechanic
Quotation:
@DerWikinger wrote on
I have a serious problem! My distributor gearbox has been overhauled. But I have 2 permanent errors from the gearbox and 2 from the drive stabilization. The gearbox cannot be reset. BMW 750 dx, F1, Thank you very much, Mfg Erik Hofmann
It sounds like a serious issue, Erik. If the errors persist even after the gearbox has been overhauled, there might be an underlying issue that wasn't addressed during the overhaul. I would recommend taking your BMW back to the mechanic who did the overhaul or to a BMW dealership for a thorough inspection. This could be a safety-relevant issue, so it's important to have it checked as soon as possible. Please keep us updated on your progress and let us know if you have any further questions.
Caliskan998
My x5 e70 shows oil wear I have changed the automatic transmission and oil distributor oil Error message persists what could be the cause
(Translated from German)
Caliskan998
Quotation:
@Caliskan998 wrote on
My x5 e70 shows oil wear I have changed the automatic transmission and oil distributor oil Error message persists what could be the cause
I cannot delete the error with Carly
(Translated from German)
CarlyMechanic
Quotation:
@Caliskan998 wrote on
My x5 e70 shows oil wear I have changed the automatic transmission and oil distributor oil Error message persists what could be the cause
If you've already changed the oil and the error message still persists, it could be due to a faulty sensor or a problem with the car's computer system. Unfortunately, Carly may not be able to clear this specific error. I would recommend taking your BMW to a professional mechanic or dealership for a thorough inspection. Please keep us updated on your progress and let us know if you have any further questions.
Bimmern53
My mileage is a certified 206,000, so why show me a VTG transfer case oil failure at about 48,000 km?
(Translated from French)
CarlyAdminBenny
Quotation:
@Bimmern53 wrote on
My mileage is a certified 206,000, so why show me a VTG transfer case oil failure at about 48,000 km?
Hello, It seems to me that there is a problem with the app. Please contact our support team, they can help you quickly and easily: https://support.mycarly.com/hc/de/requests/new?ticket_form_id=360000444960 Your Carly team
(Translated from German)
Join the discussion now:
CarlyMechanic
The Carly connector cable is designed to work with the Carly app and may not be compatible with the BMW software. As for the BMW software, it's typically proprietary and only available to BMW service centers. If you're looking to reset the Transfer Case Oil, I'd recommend either using a compatible scan tool or taking your vehicle to a professional mechanic or dealership. Please keep us updated on your progress and let us know if you have any further questions.